Skip to contenttop

Curbell Medical Products, Inc.

LC-040 Low Voltage Controller

100-130V Low Voltage Controller for Four-Gang
or Larger Masonry Box Applications

The LC-040 enables users to safely operate the high-voltage lighting found in hospital and nursing home rooms with their pillow speaker or bed communication side rail. It’s tested and approved for use with all Nurse Call systems that use a momentary normally open switch for auxiliaries, and is designed for applications using a four-gang or larger masonry box.

  • Can control lamps individually or sequentially
  • Can be used to operate high-voltage circuits such as lights, electric doors, and drapes
  • Includes NEC isolation barrier plates
  • No jumpers required to differentiate between one or two switch control
  • Emits no electromagnetic noise that will be detected by sensitive medical equipment
  • Isolation from line voltage via a Class II transformer
  • One year warranty
  • UL/C-UL Listed to UL 508
  • Compliant with FCC, Title 47 CFR 15 – Class B
  • RoHS compliant
Input voltage 100-130 VAC, 50/60 Hz
RMS current should not exceed 5 amps.
Output Voltage 100-130 VAC, 50/60 Hz 
Output Devices Two 10 Amp relays driven by low voltage
microcontroller, ESD protected
Switch Circuits
Operation Voltage
5 VDC at 2.3 mA
Power Supply
Classification
Isolation from line voltage via
a Class II transformer
Regulatory Listings
and Compliance
• UL/C-UL Listed to UL 508
• Compliant with FCC, Title 47 CFR 15 – Class B
• RoHS compliant
Operating Temp. Range 40º to 105º F (5º to 40º C)
External Wires White and black wires: 16 AWG stranded
All other wires: 18 AWG stranded
Mounting Designed to mount into a 3.5” deep masonry box
with a minimum of four gangs
Housing 058" Galvanized Zinc-Plated Steel
Dimensions 3.5” (L) x 3.5” (W) x 3.8” (D)